Techstream Download

How to setup mini vci with Techstream on 64bit computer

Posted by:mistan

Following info is adapted from here. Another site with a similar instruction. If you do not have the software and drivers, a vender from amazon provides a link for download.

TIS Techstream V10 Setup Instruction ( !!! for 64 bit system !!! ) :

Techstream Lite allows Techstream diagnostic software to run on your PC (see minimum PC requirements) to service Toyota, Scion, and Lexus vehicles. Obdii365.com always have enough stock and have a long lasting tire with globally trusted express companies, such as: DHL, UPS, EMS, FedEx, TNT, Singapore post. Obdii365 promises to ship the packages as soon as possible and in a good packaging. Obdii365 ships to many countries around the world. Obdii365 not Refuse Improve and Perfect.

1. The Techstream version 12* and above should be compatible with Windows 10 64 bit system.
   • Installed and follow through instruction.
   • Start Techstream and input Area, then shutdown
   • copy Mainmenu.exe in Bin folder under installation folder.
   • start Techstream and input registration code.
2. unzip the MCVIDriver.msi, move the contents under “C:Program Files (x86)XHorse ElectronicsMVCI Driver for TOYOTA TIS”.
3. plug in mini VCI cable.
4. Open the Device Manager the device should be loaded. If not, right click each failing device, select Install Driver, then ”Browse my Computer” and locate to “C:Program Files (x86)XHorse ElectronicsMVCI Driver for TOYOTA TIS” (enable the ”include subfolders” flag). Click ”Next” and wait until drivers are installed. You should now see two new devices: ”Universal Serial Bus ControllersUSB Serial Converte” and ”Ports (COM & LPT)USB Serial Port (COMx)”.
5. Run the FirmwareUpdateTool.exe from the “C:Program Files (x86)XHorse ElectronicsMVCI Driver for TOYOTA TIS”. Click ”Device Info”, You should see the ”Device connected” screen.

1. Now install Techstream software using “Techstream_Setup_V12…exe” on our software CD

2. Software Registration: copy the two *.ini files in ”Registration” folder to “C:Program Files (x86)Toyota DiagnosticsTechstreamEnv

   Attention: It’s C:Program Files (x86) not C:Program Files , BIG DIFFERENCE !!!

3. Registry Hack: Run the mvci-64bit.reg file (here for download) to modify the registry for Techstream to recognize MINI-VCI under Windows x64
4. Run Techstream software. Go to Setup VIM Select menu and select the ”XHorse — MVCI”
5. Connect Mini VCI cable to your car‘s OBDII interface, turn ignition on, then click ”Connect to Vehicle” in Techstream. Wait. Then wait again. If everything works, you will be prompted to confirm car year/model after which you’ll get to the diagnostic interface.

Important Note:

1. DO NOT change the “User Type” when you will run your TIS Techstream for 1st time! LEAVE IT with the Default option! “Official” Dealer/Repairer with other words…
2. in [ VIM Select ] option, please select the [ Xhorse — MVCI ], not [ TIS Techstream VIM ]
3. If you get the following reminder while using the program:

— — — — — — — — — — — — — — — — — — — — — –

Register Techstream Software (S314–03)

Network connection is unavailable. A network connection is required to use Techstream software.

You can only connect 29 more times without a network connection before software registration is required.

— — — — — — — — — — — — — — — — — — — — —

You can reset that as following steps:

Go to C:Program FilesToyota DiagnosticsTechstreamEnv and find ”IT3usercustom.ini” file and look for ”Connectioncount=1” or what ever number of times you tried and just delete ”connectioncount=1”. Click save and you should be reseted back to 30

(10-2018) Free download Toyota Techstream v13.20.018 software:

Updated on 10-2018

Version: Toyota techstream v13.20.018 for USA / Canada / maybe Mexico

(13.20.017 which is probably the euro/japan or whatever other area version)

Techstream 13.20.018 activation help:

please refer to our friends Autokent, Balyanchic and Kiki using this link: https://mhhauto.com/Thread-TOYOTA-Techstream-V13-20-017-08-2018-Activation

IMPORTANT: this latest version has NOT been tested yet by professionals.

For sake of security, you’d better try the tested version Techstream v13:

Mini VCI cable Techstream v13 softwware basic diagnosis + customization

VXDIAG VCX NANO Toyota Techstream v13 diagnosis + programming (add keys)

Techstream 13.20.018 Released Notes:

l Techstream 13.20.018 Toyota Vehicle Coverage

Fully Supported Models

2018 and Earlier Model Years

• All Models are currently supported

2019 Vehicle Coverage

Partial Support

l Techstream 13.20.018 Enhancements

There are no new Enhancements for this version of software.

l Toyota Techstream 13.20.018 New Features

ECU Data Save and Write

Description:
These functions are used to save and write the ECU data.

Applicable Models/Systems:
2019~ RAV4 – Four Wheel Drive

System Path:
Four Wheel Drive / Utility / ECU Data Save
Four Wheel Drive / Utility / ECU Data Write

Disconnect System Function Check

Description:
This function is used to check the disconnect system function.

Applicable Models/Systems:
2019~ RAV4 – Four Wheel Drive

System Path:
Four Wheel Drive / Utility / Disconnect System Function Check

ECU Data Initialization

Description:
This function is used to initialize the ECU data when replacing a part.

Games of tomb raider in order. Applicable Models/Systems:
2019~ RAV4 – Four Wheel Drive

System Path:
Four Wheel Drive / Utility / ECU Data Initialization

Air Bleeding

Description:
This function is used to bleed the air in the brake system.

Applicable Models/Systems:
2019~ LS500 – Brake

System Path:
Brake / Utility / Air Bleeding

Initial Axis Adjust Value Display

Description:
This function is used to display the initial axis adjust value which recognition camera stores.

Applicable Models/Systems:
2016~ ES 350/300h – Front Recognition Camera
2016~ Yaris – PCS/LDA/RSA/LVN

System Path:
PCS/LDA/RSA/LVN / Utility / Initial Axis Adjust Value Display

ECU Exchange

Description:
This function is used to inherit the data of the Stop and Start related parts which is stored in the old Stop and Start ECU to the new ECU.
The data of the Stop and Start related parts are: Starter Operation # and Total Number of Engine Starts.
Also performs Learning of the External BBC Availability for the vehicles that have External BBC on board.

Applicable Models/Systems:
2019~ Highlander – Stop and Start

System Path:
Stop and Start / Utility / ECU Exchange

Switch Specification Information

Description:
This function is used to Switch Specification Information.

Applicable Models/Systems:
2019~ RAV4 HV – Engine

System Path:
Engine / Utility / Switch Specification Information

Power Steering ECU Initial Setting

Description:
This function is used to perform the initial setting of the Power Steering ECU to make the Power Steering usable.

Applicable Models/Systems:
2019~ RAV4 – EMPS

System Path:
EMPS / Utility / Power Steering ECU Initial Setting

Front Resolver Learning/Initialization

Description:
This function is used to learn and initialize the correction amount for front motor resolver (2MG) and generator resolver (1MG) variations.

Applicable Models/Systems:
2019~ RAV4 HV – Motor Generator

System Path:
Motor Generator / Utility / Front Resolver Learning/Initialization

Rear Resolver Learning/Initialization

Description:
This function is used to learn and initialize the correction amount for rear motor resolver (3MG) variations.

Applicable Models/Systems:
2019~ RAV4 HV – Rear Motor Generator

System Path:
Rear Motor Generator / Utility / Rear Resolver Learning/Initialization

Key Registration

Description:
This function is used to register immobilizer keys and adds the function which accesses a server for security strengthening.

Applicable Models/Systems:
2019~ RAV4 – Immobilizer

System Path:
Immobilizer / Utility / Key Registration

Immobilizer Code Reset

Description:
This function is used to erase all registered Immobilizer Codes and adds the function which accesses a server for security strengthening.

Applicable Models/Systems:
2019~ RAV4 – Immobilizer

System Path:
Immobilizer / Utility / Immobilizer Code Reset

Undesignated Key Permanent Erasure

Description:
This function is used to completely delete the undesignated keys registered in the vehicle to prevent the engine start by lost keys.

Applicable Models/Systems:
2019~ RAV4 – Immobilizer

System Path:
Immobilizer / Utility / Undesignated Key Permanent Erasure

l Techstream 13.20.018 Software Corrections

This release addresses a number of software bugs. For more details, please refer to the v13.20.018 Known Bugs List. In the event you experience a software anomaly with v13.20.018, please submit an error report using the F12 key. Your feedback will help ensure software quality for future releases.

l Techstream v13 Tech Support

Free tech support for Techstream v13 for Toyota/Lexus diagnosis and programming: http://www.obdii365.com/